ACCU CHEK 50S ACTIVE STRIPS

Key Features: Accu-Chek Active Strips 50s

• Results in 5 seconds inside the meter, 8 seconds outside
• 1 code chip included  must be inserted each time a new box is opened
• 1 to 2µl small blood sample, less pain from finger pricks
• Out-of-meter dosing applies blood before inserting it into the meter
• The re-dosing window adds more blood within 10 seconds if the first drop was insufficient
• Green dosing field clearly visible target area for blood application
• Wide capillary channel automatically draws blood in for clean testing
• Full-length protective coating handle strips without contaminating the test zone
• CE 0088 certification confirmed on the product box
• ISO 15197:2013 compliant meets international blood glucose accuracy standards
• Compatible with capillary, venous, and arterial blood
• Suitable for home and clinical use

Important Note About the Code Chip

Unlike some newer strips that auto-calibrate, the Accu-Chek Active Strips 50s require a code chip. One chip is included in every box. You must insert this chip into the meter when starting a new box. The chip tells the meter the correct calibration code for that specific batch of strips. If you skip this step, your readings may be inaccurate.

Always match the code number shown on the meter display with the code number on the strip container.

How to Use Accu-Chek Active Strips 50s

1. Wash and dry your hands completely
2. Insert the code chip from the new box into the Accu-Chek Active meter
3. Confirm the code number on the meter matches the number on the box
4. Insert a test strip, and the meter turns on automatically
5. Use a lancing device to get a small blood drop from your fingertip
6. Touch the blood drop to the green field on the strip tip
7. The strip absorbs blood automatically wait for the result
8. Read your blood glucose result in about 5 seconds
9. Remove and safely dispose of the used strip

Ingredients and Components

• Mut. Q-GDH 2 enzyme (mutant quinoprotein glucose dehydrogenase, 3.0 U): Reacts specifically with glucose in blood to produce a measurable electrical signal
• Pyrroloquinoline quinone (0.2µg): Supports electron transfer during the enzyme reaction for accurate signal generation
• Stabilizer (0.13mg): Protects the enzyme from degradation to maintain strip performance over its shelf life
• Non-reactive ingredients (1.6mg): Inactive fillers and binders that form the strip structure
• Gold electrode and capillary channel: Conducts the electrical glucose signal to the meter
• Code chip (1 per box): Calibrates the Accu-Chek Active meter to each new batch of strips
• Protective coating: Covers the full strip length for safe and clean handling

Precautions

• Use only with the Accu-Chek Active meter, not compatible with any other meter
• Always insert the included code chip when starting a new box
• Match the code number on the meter with the number on the strip container
• Check expiry date before every use
• Close the container tightly after each strip is removed
• Store between 2°C and 30°C, do not freeze or expose to direct sunlight
• Avoid storing in kitchens, bathrooms, or cars in hot weather
• Apply blood only to the green field on the strip. Do not place blood on top of the strip
• Do not reuse strips; single-use only
• Do not squeeze the finger during blood collection
• Not suitable for visually impaired individuals without assistance
• Keep out of reach of children
• Dispose of used strips safely; do not throw them in the open trash

Frequently Asked Questions

Why does Accu-Chek Active Strips 50s include a code chip, and how is it different from no-coding strips?

The code chip calibrates the Accu-Chek Active meter to the exact batch of strips in each new box. You must insert it every time you open a new box. Newer strips like the Accu-Chek Instant or Performa auto-calibrate without a chip. The Active system uses this chip to maintain accuracy across different manufacturing batches.

What happens if I forget to insert the code chip in a new box?

If the chip from the old box is still in the meter, the calibration code will not match the new batch. This can cause inaccurate readings. Always remove the old chip, insert the new one from the new box, and confirm the code number on the meter screen matches the number printed on the new container.

Can I apply blood outside the meter with these strips?

Yes. Accu-Chek Active Strips 50s support out-of-meter dosing. You can apply the blood drop to the green field on the strip before inserting it into the meter. This is helpful for elderly patients or anyone who finds in-meter dosing difficult. Results take about 8 seconds in this mode compared to 5 seconds inside the meter.

What do I do if my blood drop was too small for the strip?

You have a re-dosing window of 10 seconds after applying the first drop. Within that time, you can add more blood to the same strip. This prevents wasting a strip due to an insufficient sample. After 10 seconds, the window closes, and you will need to start with a fresh strip.